Details Of The Feature:
Appearance is dignified and stable,fine,beautiful,It has a metallic and technological image.Panels, handles and knobs, self-designed mold making.The panel layout is reasonable, exquisite workmanship, neat and high-grade.Whole machine is ventilated from the front to the rear opening.Reduce wind resistance, increase ventilation, and reduce temperature rise inside the machine.Rear panel design adopts a large-area opening to facilitate air dissipation.Signal in and out of the jack,Power output seat,Both the power input base and the function switch use high-end components.
Technical Parameters:
MODEL | DF-135 | DF-145 | DF-155 | DF-165 | DF-185 |
Output Power(8Ω) | 250W×2 | 350W×2 | 450W×2 | 550W×2 | 850W×2 |
Output Power(4Ω) | 350W×2 | 450W×2 | 600W×2 | 800W×2 | 1200W×2 |
Bridge Output Power | 600W | 900W | 1200W | 1600W | 2400W |
Frequency Response | 20Hz-20KHz, ±1dB | ||||
Input Sensitivity | 0.775V 1.0V 1.5V | ||||
Input Resistance | Balance20KΩ Unbalanced10KΩ | ||||
Signal To Noise Ratio | -110dB | ||||
Distortion | <0.1%(20Hz-20KHz 8Ω) | ||||
Resolution | >60/dB | ||||
Voltage Gain | (8Ω)35dB | ||||
Damping Coefficient | >440/ | ||||
Conversion Rate | >40/μm | ||||
Low frequency output range | 25Hz-150Hz | ||||
Input Terminal | BalanceXLRInsert | ||||
Output Terminal | Four coreSpeakonAnd anti-touch terminals | ||||
Protection | Power on protection, short circuit protection, DC and over temperature protection | ||||
Cool Down | Temperature controlled variable speed fan | ||||
Display | LED | ||||
Power Consumption | 220V 8A | 220V 10A | 220V 12A | 220V 15A | |
Size | 88×483×410mm(H×W×D) | ||||
Net Weight | 15kg | 16kg | 17kg | 20kg | 22kg |
Gross Weight | 17kg | 18kg | 19kg | 22kg | 24kg |